.1.3.6.1.4.1.21749.1.1.1 = ADC1 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.2 = ADC2 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.3 = ADC3 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.4 = ADC4 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.5 = ADC5 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.6 = ADC6 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.7 = ADC7 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.8 = ADC8 Volts (returns an ASCII string)
.1.3.6.1.4.1.21749.1.1.9  = ADC1 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.10 = ADC2 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.11 = ADC3 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.12 = ADC4 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.13 = ADC5 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.14 = ADC6 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.15 = ADC7 Millivolts (returns an integer)
.1.3.6.1.4.1.21749.1.1.16 = ADC8 Millivolts (returns an integer)

.1.3.6.1.4.1.21749.1.2.1 = RELAY1 (returns an ASCII string)
.1.3.6.1.4.1.21749.1.2.2 = RELAY2 (returns an ASCII string)
.1.3.6.1.4.1.21749.1.2.3 = RELAY3 (returns an ASCII string)

.1.3.6.1.4.1.21749.1.3.1 = I/O 1 (returns an interger)
.1.3.6.1.4.1.21749.1.3.2 = I/O 2 (returns an interger)
.1.3.6.1.4.1.21749.1.3.3 = I/O 3 (returns an interger)
.1.3.6.1.4.1.21749.1.3.4 = I/O 4 (returns an interger)
.1.3.6.1.4.1.21749.1.3.5 = I/O 5 (returns an interger)

.1.3.6.1.4.1.21749.1.4.1 = UPTIME IN SECONDS (returns 4 integers)
.1.3.6.1.4.1.21749.1.5.1 = STATION NAME (returns an ASCII string)
.1.3.6.1.4.1.21749.1.6.1 = TEMPERATURE (returns an integer)
.1.3.6.1.4.1.21749.1.7.1 = MAC ADDRESS (returns an ASCII string)
.1.3.6.1.4.1.21749.1.8.1 = FIRMWARE VERSION (returns a ASCII string)

.1.3.6.1.2.1.1.1 = Standard SNMP System Description:
.1.3.6.1.2.1.1.2 = Standard SNMP sysObjectID: (Added in Firmware 1.7.5)
.1.3.6.1.2.1.1.3 = Standard SNMP Timeticks: (in milliseconds)
.1.3.6.1.2.1.1.5 = Standard SNMP System Name:


SNMP Linux Command Line Example to retrieve the status of Relay1 on a RMSv1 unit using SNMPget:

[root@vmware root]# snmpget -v 1 -c public 10.10.10.10 .1.3.6.1.4.1.21749.1.2.1 (press enter)

returns:

SNMPv2-SMI::enterprises.21749.1.2.1 = STRING: "ON"
                          ^   ^ ^ ^
                          |   | | |
     RMS Enterprise Number    | | |
                         RMSv1  | |
                  RELAY CATIGORY  |
                            RELAY1 
                           
NOTE: RMSv1 SNMP support is limited to 1 PDU per request. Read only access.

SNMP password is hardcoded to "public". SNMP may be disabled through the windows client in the security section.