RMS-200v2 One (1) Year Limited Warranty
EtherTek Circuits warranty obligations are limited to the terms set forth below:
EtherTek Circuits LTD warrants their hardware products against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original purchase. If a defect exists, at its option EtherTek Circuits LTD will (1) repair the product at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. A replacement product/part assumes the remaining warranty of the original product or ninety (90) days from the date of replacement or repair, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes EtherTek Circuits LTD property. When a refund is given, your product becomes the property of EtherTek Circuits LTD. Contact your RMS-200v2 retailer for warranty instructions.
EXCLUSIONS AND LIMITATIONS
Software distributed by EtherTek Circuits LTD is not covered under this Limited Warranty.
Recovery and reinstallation of application software and user data are not covered under
this Limited Warranty. EtherTek Circuits LTD and its Authorized Resellers are not liable for
any damage to equipment, buildings and/or property by the use or misuse of our products.
This warranty does not apply: (a) to damage caused by accident, abuse, misuse,
misapplication; (b) to damage caused by service (including upgrades and expansions)
performed by anyone who is not an EtherTek Circuits LTD Authorized Service Provider; (c) to a
product or a part that has been modified without the written permission of EtherTek
The RMS-200v2 circuit board is supplied as OEM-type equipment and not in retail form. The RMS-200v2 is cassified as a sub assembly which means it is an assembled unit designed to be incorporated with other units in a finished product. It is therefore imperative that the user/purchaser understands the correct installation, configuration and operation of this equipment. Operation and configuration information is available via the website and is updated regularly. We recommend reviewing the website materials before powering the boards. The manufacturer and distributor cannot be held responsible for improper installation and configuration of this equipment and/or any damage caused by its improper use.
Interfacing external components or equipment to the RMS-200v2 board is not intended for the novice electronics hobbyist, medium to advanced knowledge of electronic circuit design is necessary. The manufacturer and distributor cannot be held responsible for improper interfacing of custom circuits or equipment that damage the RMS-200v2 circuit board or other equipment or property.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. EtherTek Circuits LTD SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF EtherTek Circuits LTD CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
WARNING: Electrical projects are inherently dangerous, and even the most benign task can
cause serious injury or death if not done properly.
ALWAYS READ AND FOLLOW INSTRUCTION MANUALS AND SAFETY WARNINGS OF TOOLS OR EQUIPMENT.
You must be particularly careful when dealing with electricity - always use common sense. Any advice, guidance or other information provided on this website or within any of our publications cannot completely anticipate your situation. If you are at all unsure about installing electrical equipment, consult a qualified electrical contractor to perform the service(s) for you.
ALWAYS follow electrical code requirements specific to your area, and before undertaking any electrical project, contact your local electrical authority and your insurance company to ensure that you comply with all policies, warranties, regulations and authorities concerning this work.
YOU EXPRESSLY AGREE TO HOLD ETHERTEK CIRCUITS LTD HARMLESS FOR ANY PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH, OR ANY OTHER LOSS OR DAMAGE THAT MAY RESULT FROM YOUR USE OF THE PRODUCTS, INFORMATION, OR SERVICE PROVIDED.
No advice or information, whether oral or written, obtained by you from us or through the service, its employees, consultants and/or experts shall create any warranty not expressly made herein.
The reader of the information on this website agrees to assume all risk resulting from the application of any of the information provided by EtherTek Circuits LTD.
By using this website, including any applets, software and content contained therein, the visitor agrees that the use of this web site and its information or products is entirely at his/her own risk.
EtherTek Circuits started its business in 2001. Ever since we have provided remote monitoring and control solutions for Remote Tower Sites, the Oil & Gas industry, Telemetry systems for Agriculture, Municipalities, Mines, Solar Farms, Hydro Plants, and the Military.
PO Box 1576,
Princeton, B.C. V0X-1W0 CANADA
+1 (250) 295-6794
+1 (250) 868-0448